|
|
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
|
|
|
Build Your Online Product Catalogs?
Product Name: |
Split Casing pumpSplit Casing pump
|
Supply Ability: |
800 |
Related proudcts |
split casing pump, |
Specifications |
Split Casing pump |
Price Term: |
(FOB,CNF,CIF,Other) |
Port of loading: |
|
Minimum Order |
1 |
Unit Price: |
300 |
|
Both inlet and outlet of this pump are placed under the axial line, horizontally and vertical to the axial line, the pump casing is opened in the middle, so it is unneccessary to remove the water inlet and outlet pipelines and motor(or other prime movers). The pump moves CW viewing from the clutch to it. The pump moving CCW can also be made.
The main parts of the pump are: pump casing, pump cover , impeller , shaft, dual-suction seal ring, muff, bearing etc.
The impeller is static-balance calibrated, fixed with the muff and the muff nuts in both sides and its axial position can be adjusted via the nuts and axial force gets balanced by means of the symmetrical arrangement of its blades.
The pump shaft is supported by two single-column centripetal ball bearings, which are mounted inside of the bearing body on both ends of the pump and lubricated with grease. The dual-suction seal ring is used to reduce the leak at the impeller
The flexible couplings connect the pump with the motor directly. For pumps driven by belt, there must be an intermediate bracket fitted for supporting the belt pulley.
1.Bearing 2.Framework oil seal 3.Bearing gland 4.Pump casing 5.Packing gland 6.Packings 7.Packing ring 8.Packing sleeve 9.Shaft sleeve 10.Pump cover 11.Impeller 12.Washing pipe 13.O ring 14.Seal ring for casing 15.Mechanical seal liner 16.O ring 17.Mechanical seal 18.Mechanical seal gland 19.Water retaining ring 20.O ring 21.Bearing housing at driven end 22.Shaft 23.Couplings 24.C type key 25.Framework oil seal 26.Shaft ring 27.Bearing junk ring 28.Cylindrical pin 29.Mechanical seal 30.Cylindrical pin 31.B type key 32.Packing seal 33.Seal 34.Round nut lock washer 35.Round nut 36.Bearing inner liner 37.Pump end bearing housing 38.Bearing ***cer
|
Company: |
Shijiazhuang An Pump Machinery Co., Ltd
|
Contact: |
Mr. sherry lee |
Address: |
Economic and Technical Development District, Shijiazhuang, China |
Postcode: |
050000 |
Tel: |
0086 311 89940549 |
Fax: |
0086 311 86271170 |
E-mail: |
|
|
|